The following list of regulatory requirements for containerized hazardous wastes is taken from the supplimental information included in our RCRA training seminar booklets. While these points serve as a good summary, it is important to remember to be vigilant on keeping up to date with both national and state regulations.
1. Containers used for holding hazardous waste must be in good condition. If the container becomes damaged, deteriorated or begins to leak, the wastes should be transferred to a container that is in good condition.
2. Containers used for holding hazardous waste must not be deteriorated by the waste. The container or liner must be compatible with the wastes to be stored.
3. Each container must be labeled or marked clearly with the words “Hazardous Waste”.
4. The accumulation start date for each container is to be marked clearly on each container. The accumulation start date marking must be visible for inspection.
5. Containers holding hazardous wastes must always be closed during storage. The only time containers can be opened is to add or remove waste.
6. Containers holding hazardous wastes are to be managed to avoid rupturing or damaging the container, or otherwise causing the container to leak.
7. Areas where ignitable or reactive wastes are stored should be located at least 50 feet from the facility property line.
8. Ignitable or reactive wastes are to be separated and protected from sources of ignition or reaction (e.g., open flames, smoking, cutting, welding, hot surfaces, frictional heat, sparks, and radiant heat).
9. “No Smoking” signs are to be posted wherever there is a hazard from ignitable or reactive wastes.
10. Incompatible wastes, or incompatible wastes and materials must not be placed in the same container for storage purposes. Further, hazardous waste cannot be placed in an unwashed container that previously held an incompatible waste or material.
11. Incompatible hazardous wastes and hazardous wastes incompatible with nearby materials must be separated or protected from each other by means of a dike, berm, wall, or separated by sufficient distance.
12. Emergency equipment is required to be available at each accumulation area. We recomend the following:
For a list of the federally required equipment check 40CFR §265.32.
13. Adequate aisle space in the container storage area is to be maintained to allow unobstructed movement in response to an emergency, as well as to perform weekly inspections.
14. Weekly inspections must be made of container storage areas, looking for leaks or other evidence of actual or pending releases.
15. Containerized wastes are to be shipped to off-site (commercial) Hazardous Waste Management (HWM) facilities within 90 days of the accumulation start date. Small Quantity Generators (100-1000 kg/mo category) are allowed 180 day accumulation period. The SQG accumulation period is extended to 270 days when the wastes are shipped to HWM facilities that are over 200 miles from the SQG.
Heritage Environmental Services (“HES”), an EQT Infrastructure portfolio company, announced today that Timothy Thomas will join the organization as Ch
Heritage Environmental Services, an EQT Infrastructure portfolio company, has completed the acquisition of EBV from General Dynamics.
Learn more about the current and proposed regulation for PFAS and what they mean from our Chief Sustainability and Innovation Officer, Angie Martin.
Heritage Environmental Servicess, an EQT Infrastructure portfolio company, will acquire EBV from General Dynamics
An inside look at our incineration facility located in East Liverpool, OH
Heritage hosted our 14th annual Habitat for Humanity build this month, partnering with over 50 employees from various THG companies.