How do I Choose the Right Waste Container?

On Tuesday we wrote about the importance of waste characterization when it comes to containerized waste. In that post we touched briefly on the need for using an appropriate type of container to store your waste; today we’re going to look at that a little closer.

So, once a generator has their waste properly characterized they will know if it is incompatible or reactive with other waste types or even different types of containers. Once they know this, they can move on to choosing the best container in which to store their waste.

The first thing to consider when choosing your contain type is the quantity of waste you will be generating. If you know you will only be generating 20 to 25 gallons of waste than a 30-gallon drum would be more practical than a 55-gallon drum. Alternately, if you are storing contaminated gloves, coveralls, or other personal protective equipment (PPE) a 55-gallon drum would probably work best. Once you’ve decided on your container size you can move on to choosing the material your container will be made out of.

We’ve mentioned before that some wastes can actually have a negative reaction with the container they are placed in. For example, a highly corrosive waste can react with a steel drum and lead it to erode. This could make the drum leak and allow for a spill of the waste. In order to avoid this, corrosive wastes should be stored in plastic drums or plastic lined steel drums. This will prevent the waste from coming into contact with an incompatible material. As the EPA points out, “to prevent drum failure, carefully “match” the right waste with the right container.” If you are unsure if your waste and drum are compatible consult a corrosion resistance guide.

Now you’re almost in the clear but there is one more thing to consider when choosing your container. What do you do if your container once held an incompatible waste? According to §265.177(b) you are allowed to put wastes into unwashed containers that once held an incompatible waste but only if you meet the following specified conditions:

“…the mixture or commingling of incompatible wastes, or incompatible wastes and materials, must be conducted so that it does not:

  1. Generate extreme heat or pressure, fire or explosion, or violent reaction;
  2. Produce uncontrolled toxic mists, fumes, dusts, or gases in sufficient quantities to threaten human health;
  3. Produce uncontrolled flammable fumes or gases in sufficient quantities to pose a risk of fire or explosions;
  4. Damage the structural integrity of the device or facility containing the waste; or
  5. Through other like means threaten human health or the environment.”

If you cannot meet these conditions then you must make sure that the waste or material that was previously held in your container is compatible with the new waste you will be placing into it. Finally, the EPA provides the following tips for safely putting your wastes into containers:

  1. “Make sure you know which wastes are reactive and/or incompatible. Keep these wastes away from each other. Put them in separate containers.
  2. Make sure the container cannot be harmed by the waste.
  3. If you rinse out containers onsite, be aware that rinse water generated from drum washing must be contained and characterized prior to disposal.
  4. If you frequently reuse containers, consider “assigning” wastes to certain containers. This will allow you to reuse the container without washing.
  5. Use a funnel to prevent spills, and do not use the same funnel for all wastes.
  6. Certain chemicals may need room for expansion, or they may require zero headspace depending on the characteristics of the waste and storage conditions (e.g., temperature fluctuations).”

Quoted and cited information for this blog post was gathered from the EPA Handbook for Hazardous Waste Containers. As always, this blog post is not intended to be comprehensive and it is always best to check with the EPA and local government for full, up-to-date, rules and regulations

Container Management & Hazardous Waste Characterization

Before you can put a waste in a container you have to ensure that you will be managing it safely. To do this, you need to know exactly what the waste you’re dealing with is comprised of/what it can do. You need to know answers to questions like, “is it toxic?” You need to determine whether or not waste handlers will need special personal protective equipment (PPE) to handle it. You will need to identify what, if any, other chemical it might react with to avoid potential explosions or fires. And especially before putting your waste in a container you need to be sure it is not corrosive in order to prevent it eating through the container you choose. All this said, it is vital that a waste be characterized before it is placed into a container.

In their manual on container management, the EPA states that there are two ways a generator can go about characterizing a waste:

  1. Generators can sample the waste and analyze it to identify any potential issues, or
  2. Generators can, “identify the waste based on process knowledge,” meaning they could look into the constituents in the process that created the waste and use the knowledge of any characteristics those constituents have to determine whether it is likely that the produced waste also has that or those characteristics.

Additionally, they provide some best practice tips for waste characterization including, looking at a material safety data sheet (MSDS) if one is available. When looking at the MSDS pay special attention to areas marked, “physical property, reactivity, fire and explosion hazard, and special protection information.”

Another best practice is related to the second way to characterize a waste. “If a product being used in a process meets one or more hazardous characteristics, the waste generated may exhibit some of the same characteristics.”

Finally, “be aware of any changes in a production process which could alter the composition of the waste generated.” But what do you do if the waste you need to characterize is already in a container? The EPA provides some tips for that too:

  1. “Pay attention to marking/labeling which may indicate that a material is flammable, corrosive, etc.
  2. Always check with your supervisor before handling unknown drums, or drums which you feel are labeled or marked incorrectly.
  3. Look at a material safety data sheet (MSDS) if it is available.
  4. If waste is in a plastic drum it is a good indication the waste may be corrosive.”

It is also important to remember that wastes which exhibit signs of corrosivity, combustibility, flammability, oxidization, poison, reactivity, or toxicity may require specialized equipment to manage. Once you’ve got your waste characterized, it’s time to put it into the proper container.

During the characterization of your waste you should have learned if it was reactive or incompatible with another waste. This is a vital step because before you can put your waste into a container you must identify and segregate and incompatible or reactive wastes in order to prevent fires or explosions. According to the EPA, “The regulations state that incompatible wastes cannot be placed in the same container, unless you comply with other requirements found in §265.17(b). This prevents the wastes from reacting with each other (e.g., exploding, catching on fire).”

There can be exceptions if you’re putting incompatible wastes in the same containers while being pursuant to the conditions found at §265.17(b). To do this you must:

  1. “Keep the waste from becoming too hot (this will prevent fire or explosions);
  2. Keep the wastes from producing toxic and/or flammable mists, gases, fumes, or dust (this will prevent workers from being exposed to the waste and will prevent fire or explosions);
  3. Make sure that mixing the incompatible wastes won’t damage the container – the container won’t rupture or bulge; and
  4. Demonstrate that mixing the wastes won’t threaten workers, or the environment in any way.”

And remember that you should always get the okay from your supervisor or environmental coordinator before you mix any materials or wastes.

Quoted and cited information for this blog post was gathered from the EPA Handbook for Hazardous Waste Containers. As always, this blog post is not intended to be comprehensive and it is always best to check with the EPA and local government for full, up-to-date, rules and regulations.